Skip to Content
C9200L-48P-4G-cisco-catalyst-9200-series-switch-48-ports-full-poe -and-4x-1g-fixed-uplinks-switch-front-straight-kt36005-transparent-1200x960-0a22bd4

C9200L-M Series


The Catalyst 9200L-M addresses the most demanding enterprise applications by combining the simplicity of the Meraki dashboard with powerful switching hardware. To satisfy high-bandwidth applications and the deployment of high-speed wifi access points, the Catalyst 9200L-M provides multigigabit ports, 80GB stacking with either four fixed 1G/10G or two fixed 25G uplinks. The Catalyst 9200L-M delivers resiliency with fast stack convergence. The Catalyst 9200L-M provides Adaptive Policy using an over-the-wire tag which segments traffic into security groups to deliver scalable security. The Catalyst 9200L-M is integrated under the Meraki dashboard to provide a simply powerful solution to the most demanding wired access applications.

Adaptive Policy provides simple & scalable security policies to segment traffic using Security Groups. Security Groups are created in the dashboard using natural language such as “IOT device” & “Guest.” The security policy intent (e.g., Permit or Deny) is then simply provisioned between Security Groups which results in the segmentation of each group’s traffic. By making security policy management intuitive and scalable relative to legacy IP-address based Access Control Lists, Adaptive Policy empowers operators to confidently secure their network traffic independent of future network changes.

A Classic Cisco Catalyst 9200L switch can also be migrated to a Meraki-managed persona, where it would function as its Catalyst Meraki 9200L-M equivalent. For details on the migration process, please refer to our Getting started: Cisco Catalyst 9200 with Meraki Dashboard guide.


Product Highlights
  • Layer-3
  • Four SFP+(10G/1G) fixed uplinks on 4X models
  • Two SFP28(25G/10G/1G) fixed uplinks on 2Y models
  • mGig support on XG models
  • 80G Dual Dedicated Hardware Stacking Ports
  • PoE+ (30W per port) & IEEE 802.3at
  • Redundant hot swappable power supplies

Management
  • Managed via Cisco Meraki Dashboard
  • Zero-touch remote provisioning (no staging needed)
  • Basic configuration capability via local management page
  • Detailed historical per-port and per-client usage statistics
  • Operating System, device, and hostname fingerprinting
  • Automatic firmware upgrades with scheduling control
  • SNMP and SYSLOG support for integration with other network management solutions
Remote Diagnostics
  • Email, SMS and Mobile push notification alerts
  • Ping, traceroute, cable testing, and link failure detection with alerting
  • Remote packet capture
  • Dynamic and interactive network discovery and topology
  • Combined event and configuration change logs with instant search
Stacking
  • Optional stacking kit allowing 8 switches in a stack with 80Gbps of stacking bandwidth
  • Virtual stacking supports thousands of switch ports in a single logical stack for unified management, monitoring, and configuration
  • Faster convergenc
Layer 3
  • Static routing, OSPFv2
  • Multicast routing (ASM: PIM-SM)
  • Warm Spare (VRRP) *
  • DHCP Server, DHCP Relay

Ethernet Switching Capabilities
  • 802.1p Quality of Service, 8 queues (w/ 6 configurable for DSCP-to-CoS mapping)
  • 802.1Q VLAN and trunking support for up to 4,094 VLANs (1000 active VLANs with STP enabled)
  • Single Instance of 802.1s Multiple Spanning Tree Protocol (interoperable with RSTP, STP, PVST, RPVST)
  • STP Enhancements: BPDU guard, Root guard, Loop guard, UDLD
  • Broadcast storm control
  • 802.1ab Link Layer Discovery Protocol (LLDP) and Cisco Discovery Protocol (CDP)
  • 802.3ad Link aggregation with up to 8 ports per aggregate, multi-chassis aggregates supported on stacked switches
  • Port mirroring
  • IGMP snooping for multicast filtering
  • MAC Forwarding Entries: 16K
Security
  • Integrated multi-factor authentication for Dashboard management
  • Role-based access control (RBAC) with granular device and configuration control
  • Corporate wide password policy enforcement
  • IEEE 802.1X RADIUS and MAB, hybrid authentication and RADIUS server testing
  • Single-Host/Multi-Domain/Multi-Host/Multi Authentication
  • Port security: Sticky MAC, MAC Allow listing *
  • DHCP snooping, detection and blocking, Dynamic ARP Inspection
  • IPv4 and IPv6 ACLs
  • Secure Connect *
  • Adaptive Policy



Your Dynamic Snippet will be displayed here... This message is displayed because you did not provide both a filter and a template to use.



Your Dynamic Snippet will be displayed here... This message is displayed because you did not provide both a filter and a template to use.
Interfaces 24 1G ports data 24 1G ports full PoE+ 24 1G ports data 24 1G ports full PoE+ 24 ports full PoE+ (8 mGig ports up to 10G, 16 ports up to 1G) 24 ports full PoE+ (8 mGig ports up to 10G, 16 ports up to 1G)
Fixed Uplinks(SFP+/SFP28) 4x 1G SFP 4x 1G SFP 4x 10G/1G SFP+ 4x 10G/1G SFP+ 4x 10G/1G SFP+ 2x 25G/10G/1G SFP28
80G Hardware Stack Ports 2 2 2 2 2 2
Dedicated Management Interface 1 1 1 1 1 1
PoE Capabilities n/a 30W PoE+ n/a 30W PoE+ 30W PoE+ 30W PoE+
Dimensions W/Default Power Supply 1.73 x 17.5 x 12.9” (4.4 x 44.5 x 32.9cm) 1.73 x 17.5 x 12.9” (4.4 x 44.5 x 32.9cm) 1.73 x 17.5 x 12.9” (4.4 x 44.5 x 32.9cm) 1.73 x 17.5 x 12.9” (4.4 x 44.5 x 32.9cm) 1.73 x 17.5 x 15.4” (4.4 x 44.5 x 39.1cm) 1.73 x 17.5 x 15.4” (4.4 x 44.5 x 39.1cm)
Weight W/Default Power Supply 9.59 lb (4.35 kg) 10.38 lb (4.71 kg) 9.59 lb (4.35 kg) 10.38 lb (4.71 kg) 12 lb (5.44 kg) 12 lb (5.44 kg)
Mount Type 1U Rack Mount 1U Rack Mount 1U Rack Mount 1U Rack Mount 1U Rack Mount 1U Rack Mount
Hot Swap Fans No, 2x No, 2x No, 2x No, 2x No, 2x No, 2x
Switching Capacity 56 Gbps 56 Gbps 128 Gbps 128 Gbps 272 Gbps 292 Gbps
Stacking Bandwidth 136 Gbps 136 Gbps 208 Gbps 208 Gbps 352 Gbps 372 Gbps
Forwarding rate Single/Stack 41.67 Mpps / 101 Mpps 41.67 Mpps / 101 Mpps 95.23 Mpps / 155 Mpps 95.23 Mpps / 155 Mpps 214.28 Mpps / 262 Mpps 229.16 Mpps / 277 Mpps
Interfaces 48 1G ports data 48 1G ports full POE+ 48 1G ports partial PoE+ 48 1G ports data 48 1G ports full POE+ 48 1G ports partial PoE+ 48 ports full POE+ (12 mGig ports up to 10G, 36 ports up to 1G) 48 ports full POE+ (8 mGig ports up to 10G, 40 ports up to 1G)
Fixed Uplinks(SFP+/SFP28) 48 ports data 4x 1G SFP 4x 1G SFP 4x 10G/1G SFP+ 4x 10G/1G SFP+ 4x 10G/1G SFP+ 4x 10G/1G SFP+ 2x 25G/10G/1G SFP28
80G Hardware Stack Ports 2 2 2 2 2 2 2 2
Dedicated Management Interface 1 1 1 1 1 1 1 1
PoE Capabilities n/a 30W PoE+ 30W PoE+ n/a 30W PoE+ 30W PoE+ 30W PoE+ 30W PoE+
Dimensions W/Default Power Supply 1.73 x 17.5 x 12.9” (4.4 x 44.5 x 32.9cm) 1.73 x 17.5 x 12.9” (4.4 x 44.5 x 32.9cm) 1.73 x 17.5 x 12.9” (4.4 x 44.5 x 32.9cm) 1.73 x 17.5 x 12.9” (4.4 x 44.5 x 32.9cm) 1.73 x 17.5 x 12.9” (4.4 x 44.5 x 32.9cm) 1.73 x 17.5 x 12.9” (4.4 x 44.5 x 32.9cm) 1.73 x 17.5 x 15.4” (4.4 x 44.5 x 39.1cm) 1.73 x 17.5 x 15.4” (4.4 x 44.5 x 39.1cm)
Weight W/Default Power Supply 9.97 lb (4.53 kg) 10.58 lb (4.80 kg) 10.58 lb (4.80 kg) 9.97 lb (4.53 kg) 10.58 lb (4.80 kg) 10.58 lb (4.80 kg) 12.6 lb (5.71 kg) 12.6 lb (5.71 kg)
Mount Type 1U Rack Mount 1U Rack Mount 1U Rack Mount 1U Rack Mount 1U Rack Mount 1U Rack Mount 1U Rack Mount 1U Rack Mount
Hot Swap Fans No, 2x No, 2x No, 2x No, 2x No, 2x No, 2x No, 2x No, 2x
Switching Capacity 104 Gbps 104 Gbps 104 Gbps 176 Gbps 176 Gbps 176 Gbps 392 Gbps 340 Gbps
Stacking Bandwidth 184 Gbps 184 Gbps 184 Gbps 256 Gbps 256 Gbps 256 Gbps 472 Gbps 420 Gbps
Forwarding rate Single/Stack 77.38 Mpps / 137 Mpps 77.38 Mpps / 137 Mpps 77.38 Mpps / 137 Mpps 130.95 Mpps / 190 Mpps 130.95 Mpps / 190 Mpps 130.95 Mpps / 190 Mpps 291.66 Mpps / 351 Mpps 252.97 Mpps / 313 Mpps
Request a free online demo of any C9300 and Meraki Dashboard.
No Obligations!